Step 1: select basic coating

The base coating is the first step of printing, and the subsequent colors will be printed based on the base coating.

White magnetic

Highly saturated white paint is applied on the iron material, and there is no iron permeable part; The color of the pattern printed on white porcelain will be very close to the color of the pattern printed on white paper; It is not allowed to make up printing with the design of metal color or iron penetration effect.

White ink

Printing white on some areas, and then printing design patterns on these white areas; The color effect printed is close to that printed on white paper, but it is not as good as that of white magnet; It can be printed in the same metal color or through iron effect

Metal printing / iron penetration effect

If no basic coating is used during printing, the printed color will show a metallic color like iron itself; Another process is to retain the original color of iron without printing any patterns in a certain part, that is, partial iron penetration.

Step 2: select printing requirements

CMYK four color printing

Print multiple colors from a film document. Use a combination of cyan, magenta, yellow and black to make other colors.

PMS spot color

The selected specific Pantone color is matched. It is the most accurate color matching method when printing on iron with white magnetic base coating

Four color printing + spot color

The document you design can contain four colors and spot colors at the same time to show a variety of different colors

Step 3: select surface treatment

Varnish

This is the most commonly used surface treatment, varnish.

Dumb oil

Different from the shiny gloss, dumb oil is the effect of dumb color.

Over light printing mute

On the surface of the product, some patterns are displayed as varnish and some patterns are displayed as dumb oil.

Explosive oil

The process of breaking the seal in the process, an interesting and unique finish, is usually used to create a worn / antique appearance.